No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R010C00

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Prerequisites

The configurations of basic MPLS OAM functions are complete.

Procedure

  • Run display mpls oam ingress { all | tunnel interface-number } [ verbose ] command to view MPLS OAM information on the ingress.
  • Run display mpls oam egress { all | lsp-name lsp-name | lsr-id ingress-lsr-id tunnel-id tunnel-id } [ verbose ] command to view MPLS OAM information on the egress.

Example

If the configuration is successful, the commands above will display the following results:

  • Basic information about the LSP, including the tunnel name, LSP type, LSR ID of the LSP ingress, and LSP tunnel ID

  • Basic information about OAM, including the tunnel name, TTSI, packet type, and frequency

  • OAM detection information, including the packet type, frequency of detection packet transmission, detection status, and fault status. If the link is working properly, the detection status is Start and the fault status is non-defect.

  • Information about reverse LSP, including the sharing mode and configuration

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141902

Views: 69976

Downloads: 189

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next