No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - MPLS

S7700 and S9700 V200R010C00

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Tunnel Protection Group

Configuring a Tunnel Protection Group

Pre-configuration Tasks

A configured protection tunnel can be bound to a working tunnel to form a tunnel protection group. If the working tunnel fails, traffic switches to the protection tunnel. The tunnel protection group helps improve tunnel reliability.

Before configuring a tunnel protection group, complete the following tasks:
  • A TE tunnel protection group enhances reliability of the primary tunnel through planning. Before configuring a TE tunnel protection group, plan the network. To ensure better performance of the protection tunnel, the protection tunnel must detour the links and nodes through which the primary tunnel passes.

  • Perform the operation of Configuring Static BFD for CR-LSPs or Configuring Dynamic BFD for CR-LSPs to implement fast switching at the millisecond level.

Configuration Process

Except that configuring the protection switching trigger mechanism is optional, other configurations are mandatory.

Updated: 2019-04-18

Document ID: EDOC1000141902

Views: 70021

Downloads: 189

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next