No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - MPLS

S7700 and S9700 V200R010C00

This document describes MPLS configurations supported by the switch, including the principle and configuration procedures of static LSPs, MPLS LDP, MPLS TE, MPLS QoS, MPLS OAM, Seamless MPLS, and MPLS common features, and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enabling Global MPLS LDP

Enabling Global MPLS LDP

Context

You can perform other MPLS LDP configurations only after enabling global MPLS LDP.

Perform the following steps on each node in an MPLS domain.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    mpls ldp

    MPLS LDP is enabled globally and the MPLS LDP view is displayed.

    By default, LDP is not enabled globally.

  3. (Optional) Run:

    lsr-id lsr-id

    The LSR ID is set for an LDP instance.

    By default, the LSR ID of the LDP instance is the LSR ID of the local node. It is recommended that the default value be used.

    In certain networking where VPN instances are used, such as BGP/MPLS IP VPN networking, if the VPN address and the LSR ID overlap, you need to configure LSR IDs for LDP instances to ensure that TCP connections can be correctly set up.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141902

Views: 70436

Downloads: 189

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next