No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

Table 4-2 lists PIM configuration tasks.

Table 4-2  PIM configuration tasks
Task Description

Configuring IPv4 PIM-DM

PIM-DM uses the ASM model to provide multicast services. The configuration is simple, but multicast data is periodically broadcast. PIM-DM applies to small networks with densely distributed group members.

Configuring IPv4 PIM-SM

PIM-SM uses the ASM and SSM models to provide multicast services. In the ASM model, a multicast distribution tree (MDT) is set up based on receivers' request to join multicast groups. PIM-SM needs to maintain an RP, set up an RPT, and register multicast sources. The ASM model applies to the large network where members are widely distributed. In the SSM model, PIM-SM sets up an SPT between a multicast source and members and does not need to maintain an RP, set up an RPT, or register multicast sources. The SSM model applies to networks where users know the multicast source locations and directly request multicast data from a specified multicast source.

Configuring multi-instance PIM, which is included in all configuration tasks

To implement multi-instance PIM, configure PIM in multiple VPN instances. This feature allows multicast data from private networks to be forwarded in VPN instances. PIM configurations in different VPN instances do not affect each other.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 144798

Downloads: 111

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next