No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Multicast VLAN Replication Based on User VLANs

Configuring Multicast VLAN Replication Based on User VLANs


Multicast VLAN replication based on user VLANs enables a switch to copy and send multicast data to different user VLANs, reducing bandwidth consumption on the upstream device.

Configuration Process


Currently, the switch supports multicast VLAN replication based on user VLANs on IPv4 and IPv6 networks. The configuration for IPv6 networks is the same as that for IPv4 networks, except that you must enable IGMP snooping on an IPv4 network and MLD snooping on an IPv6 network. The configuration process for an IPv4 network is used as an example.

Perform the configuration in the listed sequence:

Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 155104

Downloads: 111

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next