No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

Table 10-7 lists IPv6 multicast route management configuration tasks.

Table 10-7  IPv6 multicast route management configuration tasks
Task Description

Configuring IPv6 Multicast Load Splitting

Distributes multicast data to multiple equal-cost paths.

Configuring an IPv6 Multicast Boundary

Restricts the scope of multicast forwarding.

Disabling Software Forwarding for IPv6 Multicast Packets

Prevents packet loss and mis-sequencing caused by software forwarding.

Configuring the Parameters for Controlling the IPv6 Multicast Forwarding Table

Allows you to adjust the number of multicast forwarding entries and the number of downstream nodes.

Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 152032

Downloads: 111

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next