No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

Table 6-2 lists MSDP configuration tasks.

Table 6-2  MSDP configuration tasks

Task

Description

Configuring Basic MSDP Functions

When a PIM-SM network is divided into multiple PIM-SM domains, configure basic MSDP functions on multicast switches to allow the RP in each domain to learn multicast source information in other domains and allow group members in one domain to receive multicast data from multicast sources in other domains.

Configuring SA Message Control and Caching

MSDP peers share (S, G) information by exchanging SA messages. To control SA message transmission, configure SA message control and caching.

Configuring MSDP Anycast RP

Anycast RP allows multicast sources to register with the closest RP and allows receivers to join the closest RP. This mitigates loads of a single RP, implements RP redundancy, and optimizes forwarding paths.

The MSDP multi-instance configuration is included in all configuration tasks.

MSDP peer relationships can be set up between interfaces of multicast devices in the same instance (public instance or VPN instance). MSDP peers exchange SA messages to implement inter-domain VPN multicast transmission.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 145659

Downloads: 111

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next