No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Basic IGMP Functions

Configuring Basic IGMP Functions

Context

Hosts can connect to multicast networks and receive multicast packets after basic IGMP configuration is complete on interfaces connected to user networks.

Pre-configuration Tasks

Before configuring IGMP basic functions, configure a unicast routing protocol to ensure that multicast devices have reachable unicast routes to each other.

Configuration Process

Enabling IGMP and Configuring the IGMP Version are mandatory.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 153495

Downloads: 111

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next