No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Binding User VLANs to a Multicast VLAN

Binding User VLANs to a Multicast VLAN

Context

A user VLAN can be bound to a multicast VLAN on a user-side interface. A user VLAN cannot be bound to more than one multicast VLAN on the same interface.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface interface-type interface-number

    The interface view is displayed.

  3. Run:

    l2-multicast-bind vlan vlan-id1 [ to vlan-id2 ] mvlan mvlan-id

    User VLANs are bound to a multicast VLAN on the interface.

    NOTE:
    If you want to configure Layer 2 multicast Call Admission Control (CAC) on an interface after you bind a user VLAN to a multicast VLAN on the interface, pay attention to the following points:
    • Do not configure a limit on the number of groups on the interface.
    • When configuring a limit on the number of groups in a VLAN on the interface, ensure that the VLAN is not the user VLAN or multicast VLAN.

    For details about Layer 2 multicast CAC, see Layer 2 Multicast CAC Configuration.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 145105

Downloads: 111

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next