No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPv6 PIM Configuration

IPv6 PIM Configuration

This chapter describes how to configure IPv6 PIM to allow multicast routing and forwarding on an IPv6 network.

NOTE:

PIM is implemented on an IPv6 network similarly as the implementation on an IPv4 network. For PIM implementation, see IPv4 PIM Configuration.

In this chapter, the word "router" and the router icon used in figures refer to a conventional router or Layer 3 switch.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 154838

Downloads: 111

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next