No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - IP Multicast

S7700 and S9700 V200R010C00

This document describes IP multicast basics and how to configure IP multicast features, including IGMP/MLD, PIM (IPv4&IPv6), MSDP, multicast VPN, Layer 3 multicast CAC, Layer 2 multicast CAC, IGMP/MLD snooping, and multicast VLAN, IPv4&IPv6 multicast route management, static multicast MAC address, multicast network.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting IGMP Group Memberships

Resetting IGMP Group Memberships

Context

After IGMP group memberships are reset, group members may fail to receive multicast data. Exercise caution when performing this operation.

Procedure

  • Run the reset igmp [ vpn-instance vpn-instance-name | all-instance ] group { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] [ source-address [ mask { source-mask | source-mask-length } ] ] } } command in the user view to reset dynamic IGMP entries on interfaces.
  • Run the undo igmp static-group { all | group-address [ inc-step-mask { group-mask | group-mask-length } number group-number ] [ source source-address ] } command in the interface view to reset static group memberships.
  • Run the reset igmp [ vpn-instance vpn-instance-name | all-instance ] group ssm-mapping { all | interface interface-type interface-number { all | group-address [ mask { group-mask | group-mask-length } ] } } command in the user view to reset group memberships established with IGMP SSM mapping.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141903

Views: 145890

Downloads: 111

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next