Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adjusting the Frequency of Multicast Protocol Trap Messages
Pre-configuration Tasks
Before adjusting the frequency of multicast protocol trap messages, complete the following tasks:
- Configure basic Internet Group Management Protocol (IGMP) or Multicast Listener Discovery (MLD) functions.
- Configure basic Protocol Independent Multicast (PIM) functions.
- Enable the multicast trap function.
- Adjusting the Frequency of IGMP or MLD Trap Messages
- Adjusting the Interval for Sending PIM Trap Messages
- Setting the Interval for Sending Trap Messages About IGMP Group Join Failures Due to Excessive IGMP Entries
- Setting the Interval for Sending Trap Messages About Group Join Failures Caused by IPv4 Multicast CAC Limit Exceeding
- Setting the Interval for Sending Trap Messages About Layer 2 Multicast Entry Generation Failures Caused by Layer 2 Multicast CAC Limit Exceeding
- Checking the Configuration
Previous
