No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CM/3/ALLOCUSERFAIL
CM/3/ALLOCUSERFAIL
Message
CM/3/ALLOCUSERFAIL: The number of [STRING1] users
reaches the upper limit.(UserIP:[STRING2],Mac:[STRING3],Interface:[STRING4])
Description
The number of NAC users exceeds the upper limit on
the interface.
Parameters
Parameter Name
Parameter Meaning
[STRING1]
Indicates the user name.
UserIP
Indicates the user IP address.
Mac
Indicates the user MAC address.
Interface
Indicates the number of the interface through which
users go online.
Possible Causes
The number of NAC users who go online through the
interface exceeds the upper limit.
Procedure
Run the display access-user interfaceinterface-type
interface-number command to check whether NAC users are proper.
If so, replace the device with a higher-performance device.
If not, replan the network.
Collect log information and contact technical support personnel.