Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PDF/4/WRITEPDFNOSPACE
Message
PDF/4/WRITEPDFNOSPACE:Failed to write PDF file because the storage space is not enough. (FreeSpace=[STRING]Bytes, FileLength=[STRING]Bytes)
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| FreeSpace | Indicates the remaining space. |
| FileLength | Indicates the file length. |
Possible Causes
The PDF file was updated when the remaining storage space was smaller than the size of the PDF file.
Procedure
- Enter the device directory.
- If the switch has a hard disk, run the cd hda1: command to enter the hard disk directory.
- If the switch has a flash rather than a hard disk, run the cd flash: command to enter the flash directory.
- Run the dir command to check the size of the remaining storage space. If the remaining space is not enough, run the delete command to delete unneeded files.
- Run the dir command to check whether the size of the remaining storage space is greater than the size of the PDF file.
If so, go to Step 5.
If not, go to Step 4.
- Collect log information and configuration information, and then contact technical support personnel.
- End.