Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LACP/3/OPTICAL_FIBER_MISCONNECT
Message
LACP/3/OPTICAL_FIBER_MISCONNECT: The member of the LACP mode Eth-Trunk interface received an abnormal LACPDU, which may be caused by optical fiber misconnection. (TrunkName=[STRING], PortName=[STRING], LocalParam=[STRING], PDUParam=[STRING])
Description
The member of an Eth-Trunk interface in static LACP mode received an abnormal LACPDU, which may be caused by the optical fiber misconnection.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| TrunkName | Name of an Eth-Trunk interface in static LACP mode |
| PortName | Name of the member interface of the Eth-Trunk interface in static LACP mode |
| LocalParam | Local parameters |
| PDUParam | Local parameters received using LACPDUs |
Possible Causes
The optical fiber connection was incorrect, or packets were invalid.
During an LACP negotiation between a Huawei device and a non-Huawei device, if the non-Huawei device implementation does not completely comply with the LACP protocol standard, the log may be reported on the Huawei device.
Procedure
- Check whether the members of the Eth-Trunk interface in
static LACP mode have optical fibers incorrectly connected based on LocalParam and PDUParam in the log.
- If optical fibers were connected incorrectly, go to Step 2.
- If optical fibers were connected correctly, go to Step 3.
- Connect the optical fibers correctly.
- Collect log information and configuration information, and then contact technical support personnel.
