Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VBST/3/VLANERR
Message
VBST/3/VLANERR: Because the limit of STP instances is exceeded, VLAN: [vlan-id] failed to enable.
Description
When VBST is enabled in VLANs in a batch, the VLANs where VBST fails to be enabled are recorded.
Possible Causes
There are limitations on VLAN specifications. When VBST is enabled in VLANs in a batch, VBST fail to be enabled in some VLANs.
Procedure
- Run the display stp brief command to check the VLANs
where VBST is enabled. Check whether the number of VLANs exceeds the
specifications.
If the number of VLANs does not exceed the specifications, go to step 2.
- Collect traps, logs, and configuration, and contact technical support personnel.