Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CLOCK/4/TOD_LOS
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
[ULONG] |
Indicates the number of the BITS interface:
|
Possible Causes
1. The device where the BITS interface resides is faulty.
2. The cable connection between the BITS interface and the local device is abnormal.
Procedure
- Run the display clock { bits0 | bits1 } command to check whether the BITS interface is working normally.
- Check whether the cable connection is normal.
- Check whether the BITS interface sends 1pps-tod signal.
- If the preceding information is correct, Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.