Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CFM/5/FILE_NOTEXIST
Message
CFM/5/FILE_NOTEXIST: Failed to set the [object] because the system file does not exist on [slot-id].
Description
Failed to set the system file to be loaded at the next startup of the cluster because the file did not exist.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [object] | Indicates the type of the file:
|
| [slot-id] | Indicates the name of a board. |
Possible Causes
The system file specified in the startup command did not exist on the relevant board.
Procedure
- Run the dir command to check whether
the system file specified in the startup command
exists on the relevant board.
- If the system file exists, go to Step 3.
- If the system file does not exist, go to Step 2.
- Upload the relevant system file and then run the startup command again. Then, check whether the configuration
succeeds.
- If the configuration succeeds, go to Step 4.
- If the configuration fails, go to Step 3.
- Run the display diagnostic-information command and save the command output; Collect log information and configuration information, and then contact technical support personnel.
- End.
