Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/4/ENTRESETFAIL
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [STRING1] | Information about the entity that fails to be reset, including the board name, board type, and board slot ID. |
| [STRING2] | Reason for reset failure of an entity. |
Procedure
- Manually reset the board to determine whether it can register normally.
- If so, the alarm handling ends.
- If not, go to step 2.
- Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.