Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CLOCK/4/LOCK_FAIL
Possible Causes
1. The jitter of the traced clock source is high.
2. If the clock source is changed from the external clock source to the local clock source, this log is generated. It is normal.
Procedure
- Run the display clock mode command to check whether the traced time source is correct, and run the display clock source command to check whether the status of each time source is correct.
- If the preceding information is correct, Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.