Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/4/CHAN_POWER_LACK
Message
ALML/4/CHAN_POWER_LACK:[STRING] system power is insufficient.(The used power is : = [ULONG1](W), The total power is = [ULONG2](W))
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [ULONG1] | Indicates the used power. |
| [ULONG2] | Indicates the total power of the power supply system. |
Possible Causes
- The CMU has not registered.
- The power of the power supply system is insufficient for the switch.
Procedure
- Run the display device command to check whether the CMU has registered.
- If so, go to step 2.
- If not, wait until the CMU registers.
- Check whether the log SYSTEM_POWER_NORMAL is generated.
- If so, collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
- If not, replace the power supply system with one with higher power or run the power off command to power off unnecessary boards.
