No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
USA/5/TUNNELSTATE
USA/5/TUNNELSTATE
Message
USA/5/TUNNELSTATE: The control channel between the access and control devices failed
USA/5/TUNNELSTATE: The control channel between the access and control devices was set up successfully
Description
The CAPWAP tunnel between the access and control devices is faulty.
The CAPWAP tunnel between the access and control devices is established successfully.
Possible Causes
The status of the link between the control and access devices changed.
Procedure
If the CAPWAP tunnel is established successfully, no action is required.
If the CAPWAP tunnel is faulty, perform the following operations to rectify the fault:
Check whether the link is normal.
If so, go to step 2.
If not, restore the link.
Check whether the CAPWAP tunnel configuration is correct.
If so, go to step 3.
If not, correct the configuration.
Collect log and configuration information, and contact technical support personnel.
