APS/7/PKT_PLAT_TO_PPI
Message
APS/7/PKT_PLAT_TO_PPI:Plat send packet template to adapter failed.(ModuleID=[ULONG], ProtectionID=[ULONG], APSFastSndInterval=[ULONG], WtrTime=[ULONG], HoldOffTimeInterval=[ULONG], ProtectionEnable=[ULONG], APSPktFlag=[ULONG], ProtectionMode=[ULONG], ProtectionDirection=[ULONG], RevertiveMode=[ULONG], LocalState=[ULONG], GlobalState=[ULONG], APSState=[ULONG], LocalSelector=[ULONG], LocalBridge=[ULONG], SwitchCommand=[ULONG], WorkingLinkState=[ULONG], ProtectionLinkState=[ULONG], ProtectionProtocol=[ULONG], StatusSlot=[STRING], WorkingLinkManageState=[ULONG], ProtectionLinkManageState=[ULONG], ErrorCode=[ULONG])
Description
After finishing status calculation, the APS state machine sent the packet template to the device. If the sending failed, the information about the packet template was recorded for later analysis.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| ModuleID | Indicates the index of a module. |
| ProtectionID | Indicates the index of a protection group. |
| APSFastSndInterval | Indicates the interval for fast sending packets. |
| WtrTime | Indicates the wait-to-restore time. |
| HoldOffTimeInterval | Indicates the hold-off time. |
| ProtectionEnable | Indicates the flag bit for enabling the protection. |
| APSPktFlag | Indicates the flag bit for enabling packets. |
| ProtectionMode | Indicates the protection mode. |
| ProtectionDirection | Indicates the protection direction. |
| RevertiveMode | Indicates the revertive mode. |
| LocalState | Indicates the local status. |
| GlobalState | Indicates the global status. |
| APSState | Indicates the status of APS packets. |
| LocalSelector | Indicates the local tunnel for selecting and receiving services. |
| LocalBridge | Indicates the local tunnel for sending services. |
| SwitchCommand | Indicates the local manual commands. |
| WorkingLinkState | Indicates the status of the local working link. |
| ProtectionLinkState | Indicates the status of the local protection link. |
| ProtectionProtocol | Indicates the protection protocol. |
| StatusSlot | Indicates the slot where the state machine is located. |
| WorkingLinkManageState | Indicates the management state of the local working link. |
| ProtectionLinkManageState | Indicates the management state of the local protection link. |
| ErrorCode | Indicates an error code. |