Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MPLS/4/ADD_LSPTBL_FAIL
Message
MPLS/4/ADD_LSPTBL_FAIL: Add lsp table failed because of insufficient resource. (label=[ULONG])
Procedure
- Run the display mpls lsp statistics and display mpls l2vpn resource commands to check services that consume many resources.
- Run the display current-configuration command to check detailed device configuration. Delete MPLS services that are not required, such as LDP LSP, MPLS TE, VPLS, VLL, and L3VPN.
- Run the display mpls lsp statistics and display mpls l2vpn resource commands to check whether there are available resources. If so, the problem is rectified. If the problem is not rectified, go to step 4.
- Collect log information and configuration information, and then contact technical support personnel.You can collect diagnostic information using the display diagnostic-information command.
