No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/4/STICKY_MAC_CONFLICT
SECE/4/STICKY_MAC_CONFLICT
Message
SECE/4/STICKY_MAC_CONFLICT:The MAC address entry of another type already exists. (MAC=[OCTET])
Description
The device failed to generate a snooping MAC entry after the user-bind ip sticky-mac command was run.
Parameters
Parameter Name
Parameter Meaning
MAC
MAC address that conflicts with the MAC address in the snooping MAC entry.
Possible Causes
A static MAC address on the device contains the same MAC address as that in the snooping MAC entry and its type is different from that of the snooping MAC entry.
Procedure
The switch already has static MAC entries. The static MAC entries are not updated dynamically. Therefore, snooping MAC entries do not need to be generated based on the binding table. This log is informational only, and no action is required.