CM/5/USER_OFFLINERESULT
Message
Common Mode:
CM/5/USER_OFFLINERESULT:[USER_INFO_OFFLINE]DEVICEMAC:[CHAR1];DEVICENAME:[STRING1];USER:[STRING2];MAC:[CHAR2];IPADDRESS:[IPADDRESS1];TIME:[STRING3];ZONE:[STRING4];DAYLIGHT:false;ERRCODE:[STRING5];RESULT:[STRING6];USERGROUP:[STRING7];AUTHENPLACE:[STRING8];CIB ID:[STRING9];INTERFACE:[STRING10];ACCESS TYPE:[STRING11];
Unified Mode:
Wired users:
CM/5/USER_OFFLINERESULT:[USER_INFO_OFFLINE]DEVICEMAC:[CHAR1];DEVICENAME:[STRING1];USER:[STRING2];MAC:[CHAR2];IPADDRESS:[IPADDRESS1];TIME:[STRING3];ZONE:[STRING4];DAYLIGHT:false;ERRCODE:[STRING5];RESULT:[STRING6];UclGroupName:[STRING7];UclGroupId:[STRING8];AUTHENPLACE:[STRING8];CIB ID:[STRING9];INTERFACE:[STRING10];ACCESS TYPE:[STRING11];
Wireless users:
CM/5/USER_OFFLINERESULT:[WLAN_STA_INFO_OFFLINE]ACMAC:[CHAR1];ACNAME:[STRING1];APMAC:[CHAR2];APNAME:[STRING2];USER:[STRING3];MAC:[CHAR3];IPADDRESS:[IPADDRESS1];TIME:[STRING4];ZONE:[STRING5];DAYLIGHT:false;ERRCODE:[STRING6];RESULT:[STRING7];UclGroupName:[STRING8];UclGroupId:[STRING9];AUTHENPLACE:[STRING10];CIB ID:[STRING11];INTERFACE:[STRING12];ACCESS TYPE:[STRING13];
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| USER_INFO_OFFLINE | Indicates that a wired user gets offline. |
| WLAN_STA_INFO_OFFLINE | Indicates that a wireless user gets offline. |
| DEVICEMAC | Indicates the device MAC address. |
| DEVICENAME | Indicates the device name. |
| ACMAC | Indicates the MAC address of an AC. |
| ACNAME | Indicates the name of an AC. |
| APMAC | Indicates the MAC address of an AP. |
| APNAME | Indicates the name of an AP. |
| USER | Indicates the user name. NOTE:
The user name can contain only letters, digits, and special characters. Chinese characters are not allowed. |
| MAC | Indicates the MAC address of the user. |
| IPADDRESS | Indicates the IP address of the user. NOTE:
If there is no IP address when the user is offline, the value is -. |
| TIME | Indicates the system time. |
| ZONE | Indicates the time zone. |
| DAYLIGHT | Indicates whether the daylight saving time is used. |
| ERRCODE | Indicates the error code for the user offline event. |
| RESULT | Indicates the result of the user offline event. |
| USERGROUP | Indicates the user group. |
| UclGroupName | Indicates the ucl group name. |
| UclGroupId | Indicates the ucl group id. |
| AUTHENPLACE | Indicates NAC user authentication place. |
| CIB ID | Indicates the CIB ID. NOTE:
The device automatically assigns an ID to a user after the user goes online. You can run the display access command to query this ID. |
| INTERFACE | Indicates the access interface. NOTE:
|
| ACCESS TYPE | Indicates the access Type. NOTE:
If the users cannot successfully go online, the access type is recorded as None. |
Procedure
- If user authentication fails, check the cause based on
the RESULT field or contact technical support personnel. If user authentication
is successful, no action is required.
For the descriptions, possible causes, and solutions of abnormal user logins and logouts, see "Common Causes for Access Authentication Failures" in the Huawei S Series Campus Switches Troubleshooting Guide.
