Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AM/4/PREFALLOCFAIL
Message
AM/4/PREFALLOCFAIL: Failed to allocate an IPv6 prefix. (PoolName=[STRING1], ClientId=[STRING2], Reason=[STRING3], UserType=[STRING4])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| PoolName | Address pool name. |
| ClientId | ID of the client. |
| Reason | Cause of the failure to allocate an IPv6 prefix to the client. |
| UserType | User type of the client. The value can be DHCP. |
Procedure
- Based on the possible causes, perform the following steps:
- If IPv6 prefixes in the address pool were used up, run the address prefix ipv6-prefix/ipv6-prefix-length command in the address pool view to extend the range of available IPv6 prefixes in the address pool.
- If the address pool was locked, check why it is locked and run the undo lock command in the address pool view to unlock the address pool.
