Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CM/4/UCLGROUP_RESOURCE_FULL
Description
The number of static resource groups created on the card exceeded the upper limit allowed by the card, or the IP addresses in the UCL group are incorrect.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [STRING] |
|
Possible Causes
- The number of static resource groups created on the card exceeded the upper limit allowed by the card.
- The IP addresses in the UCL group were incorrect.
Procedure
- Run the display ucl-group all command to view information about all UCL groups that have been created. If the number of static resource groups reaches the upper limit allowed by the card, no more static resource group can be created. Adjust the UCL group configuration.
- Run the display ucl-group ip command to view information about UCL groups, and ensure that the UCL groups are correctly configured.