Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE/4/DAI_DROP_PACKET
Message
SECE/4/DAI_DROP_PACKET:Not hit the user-bind table.(SourceMAC=[STRING], SourceIP=[STRING], SourceInterface=[STRING], DropTime=[STRING])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
[STRING] |
Indicates the source MAC address of the ARP packets. |
[STRING] |
Indicates the source IP address of the ARP packets. |
[STRING] |
Indicates the source interface of the ARP packets. |
[STRING] |
Indicates the packet discard time. |
Possible Causes
The device receives an ARP packet that does not match any entry in the DHCP snooping binding table.
Procedure
- Find out the interface where attacks occur according to Interface in the alarm message.
- Run the display dhcp snooping user-bind command to check whether users who are not in the DHCP snooping binding table range are connected.
- If new users are connected, run related DHCP snooping commands to generate the DHCP snooping binding entry.
