Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
AM/4/IPPOOL_BACKUPERR
Message
AM/4/IPPOOL_BACKUPERR: Received wrong backup data. (PoolName=[STRING], BackUpData=[STRING], Reason=[STRING])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| PoolName | Name of an IP address pool. |
| BackUpData | Backup data of the IP address pool. |
| Reason | Cause of the incorrect backup data of the IP address pool. |
Possible Causes
The IP address pool configurations on the active and standby devices were inconsistent.
Procedure
- Run the display ip pool command to check whether the IP address pool configurations on the active and standby devices are consistent.
If the configurations are consistent, go to step 3.
If the configurations are inconsistent, go to step 2.
- Change the IP address pool configuration on the standby device to be the same as that on the active device.
- Collect log and configuration information, and contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.