No relevant resource is found in the selected language.
Enterprise
Worldwide
Huawei Global - English
Support Documentation
Log Reference
S7700 and S9700 V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.

Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EOAM1AG/5/ISSUSTATUS

EOAM1AG/5/ISSUSTATUS

Message

EOAM1AG/5/ISSUSTATUS:The ISSU working status of EOAM 1AG is [STRING]. (Time=[ULONG])

Description

The ISSU working status of the EOAM 1AG module.

Parameters

Parameter Name Parameter Meaning
STRING The ISSU working status of the EOAM 1AG module.

  • ISSU batch backup of main board in phase 1 started: The first phase for the ISSU batch backup of the main board started.

  • ISSU batch backup of main board in phase 1 over: The first phase for the ISSU batch backup of the main board was over.

  • ISSU batch backup of interface board in phase 1 started: The first phase for the ISSU batch backup of the interface board started.

  • ISSU batch backup of interface board in phase 1 over: The first phase for the ISSU batch backup of the interface board was over.

  • ISSU batch backup recovery of main board in phase 1 started: The first phase for the ISSU configuration recovery of the main board started.

  • ISSU batch backup recovery of main board in phase 1 over: The first phase for the ISSU configuration recovery of the main board was over.

  • ISSU batch backup recovery of interface board in phase 1 started: The first phase for the ISSU configuration recovery of the interface board started.

  • ISSU batch backup recovery of interface board in phase 1 over: The first phase for the ISSU configuration recovery of the interface board was over.
Time Period from the system startup to now, in milliseconds.

Possible Causes

Cause:

The EOAM1AG module is performing the ISSU.

Procedure

  1. This log message is informational only, and no action is required.
Translation
简体中文
Download
Updated: 2022-05-26

Document ID: EDOC1000141911

Views: 1754516

Downloads: 131

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Digital Signature File

Digital Signature Authentication Mode
Share
Previous Next

Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :