Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/0/BRD_PWOFF
Message
ALML/0/BRD_PWOFF: Board is powered off for overtemperature.(Index=[ULONG], EntityPhysicalIndex=[ULONG], PhysicalName=[STRING], EntityTrapFaultID=[ULONG])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| Index | Indicates the entity index. |
| EntityPhysicalIndex | Indicates the entity index. |
| PhysicalName | Indicates the entity name. |
| EntityTrapFaultID | Indicates the trap ID. |
Procedure
- Run the display fan command to check whether the fan module is installed properly.
- If so, go to step 2.
- If not, install the fan module properly.
- Rectify the fault according to "A Fan Fails" in the Revelations of Troublesolving - Campus Switch - Hardware Fault.
