CM/5/USER_ACCESSRESULT
Message
Common Mode:
CM/5/USER_ACCESSRESULT:[USER_INFO_AUTHENTICATION]DEVICEMAC:[CHAR1];DEVICENAME:[STRING1];USER:[STRING2];MAC:[CHAR2];IPADDRESS:[IPADDRESS1];TIME:[STRING3];ZONE:[STRING4];DAYLIGHT:false;ERRCODE:[STRING5];RESULT:[STRING6];USERGROUP:[STRING7];AUTHENPLACE:[STRING8];CIB ID:[STRING9];INTERFACE:[STRING10];ACCESS TYPE:[STRING11];
Unified Mode:
Wired users:
CM/5/USER_ACCESSRESULT:[USER_INFO_AUTHENTICATION]DEVICEMAC:[CHAR1];DEVICENAME:[STRING1];USER:[STRING2];MAC:[CHAR2];IPADDRESS:[IPADDRESS1];TIME:[STRING3];ZONE:[STRING4];DAYLIGHT:false;ERRCODE:[STRING5];RESULT:[STRING6];UclGroupName:[STRING7];UclGroupId:[STRING8];AUTHENPLACE:[STRING8];CIB ID:[STRING9];INTERFACE:[STRING10];ACCESS TYPE:[STRING11];
Wireless users:
CM/5/USER_ACCESSRESULT:[WLAN_STA_INFO_AUTHENTICATION]ACMAC:[CHAR1];ACNAME:[STRING1];APMAC:[CHAR2];APNAME:[STRING2];USER:[STRING3];MAC:[CHAR3];IPADDRESS:[IPADDRESS1];TIME:[STRING4];ZONE:[STRING5];DAYLIGHT:false;ERRCODE:[STRING6];RESULT:[STRING7];UclGroupName:[STRING8];UclGroupId:[STRING9];AUTHENPLACE:[STRING10];CIB ID:[STRING11];INTERFACE:[STRING12];ACCESS TYPE:[STRING13];
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| USER_INFO_AUTHENTICATION | Indicates authentication for a wired user. |
| WLAN_STA_INFO_AUTHENTICATION | Indicates authentication for a wireless user. |
| DEVICEMAC | Indicates the device MAC address. |
| DEVICENAME | Indicates the device name. |
| ACMAC | Indicates the MAC address of an AC. |
| ACNAME | Indicates the name of an AC. |
| APMAC | Indicates the MAC address of an AP. |
| APNAME | Indicates the name of an AP. |
| USER | Indicates the user name. NOTE:
The user name can contain only letters, digits, and special characters. Chinese characters are not allowed. |
| MAC | Indicates the MAC address of the user. |
| IPADDRESS | Indicates the IP address of the user. NOTE:
If there is no IP address in user authentication, the value is -. |
| TIME | Indicates the system time. NOTE:
Difference between the current time and the initial time (00:00:00 on January 1, 1970), in seconds. |
| ZONE | Indicates the time zone. |
| DAYLIGHT | Indicates whether the daylight saving time is used. |
| ERRCODE | Indicates the error code for user authentication
failure. NOTE:
When the error code is 255, the error field is meaningless. |
| RESULT | Indicates the authentication result. |
| USERGROUP | Indicates the user group. |
| UclGroupName | Indicates the ucl group name. |
| UclGroupId | Indicates the ucl group id. |
| AUTHENPLACE | Indicates NAC user authentication place. NOTE:
Currently only NAC users support this field, PPP and management users do not support this field. |
| CIB ID | CIB ID. NOTE:
The device automatically assigns an ID to a user after the user goes online. You can run the display access command to query this ID. |
| INTERFACE | Access interface. NOTE:
|
| ACCESS TYPE | Access Type. NOTE:
If the users cannot successfully go online, the access type is recorded as None. |
Possible Causes
A user initiates authentication, pre-authentication, or modification of user group authorization information.
Procedure
- If user authentication fails, check the cause based on
the RESULT field or contact technical support personnel. If user authentication
is successful, no action is required.
For the descriptions, possible causes, and solutions of abnormal user logins and logouts, see "Common Causes for Access Authentication Failures" in the Huawei S Series Campus Switches Troubleshooting Guide.
