Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BULKSTAT/3/FILE_DISCARD
Message
BULKSTAT/3/FILE_DISCARD:OID [oid] The file was discarded because of transfer failure. (FileIndex=[integer], FileName=[octet], LastTransferFailTime=[integer])
Description
The statistics file still failed to be uploaded after the period for reserving the statistics file expired. The device then tore down the link for uploading, deleted the compressed statistics file in the memory, and sent a Trap message.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| oid | Indicates the OID value. |
| FileIndex | Indicates the index of a file. |
| FileName | Indicates the name of a file. |
| LastTransferFailTime | Indicates the time of the last file transfer failure. |
Possible Causes
1. Links for uploading files were disconnected or did not exist.
2. The period for uploading the statistics file exceeded the period for reserving the statistics file.
Procedure
- Check whether the hwBulkStatURLConnectionFail alarm is
received.
If so, go to Step 2.
If not, go to Step 3.
- Clear the alarm based on the hwBulkStatURLConnectionFail alarm handling suggestion. Go to Step 5.
-
Increase the bandwidth of the upload link, or run the undo object command to simplify the configuration and reduce the size of the
uploaded file. Then check whether the trap is recovered.
If so, go to Step 5.
If not, go to Step 4.
- Collect log information and configuration information, and then contact technical support personnel.
- End.