Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
QOSE/3/CMD_FAIL
Description
The qos local-precedence-queue-map command fails to be executed on the LPU in the specified slot.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| STRING1 | Command that fails to be executed, that is, qos local-precedence-queue-map. |
| STRING2 | Slot ID of the LPU. |
Possible Causes
The qos local-precedence-queue-map command is executed on the LPU that does not support this command.
Procedure
- Check whether the LPU is required to support qos
local-precedence-queue-map based on networking and service
requirements.
- If so, go to step 2.
- If not, go to step 3.
- Use the LPU that supports qos local-precedence-queue-map to replace the existing one.
X series cards do not support qos local-precedence-queue-map.
- This message is informational only, and no action is required.
