Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DEFD/6/HOSTCAR_DROP
Message
DEFD/6/HOSTCAR_DROP:Rate of packets to cpu exceeded the HOSTCAR limit. (CarID=[ULONG], ExceededPacketCount=[STRING])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| CarID | Indicates the bucket ID for rate limiting. |
| ExceededPacketCount | Indicates the number of packets exceeding the user-level rate limit. |
Possible Causes
The rate of packets sent to the CPU exceeded the user-level rate limit and the excessive packets were discarded.
Procedure
- If a large number of normal service packets are sent to the CPU, run the cpu-defend host-car [ mac-address mac-address | car-id car-id ] pps pps-value command to adjust the rate limit. Otherwise, some packets will be discarded, affecting normal services. Adjusting the rate limit may affect CPU usage. You are advised to contact technical support personnel.
- If a large number of packets from abnormal services are sent to the CPU, locate the cause based on other log information.
