ISIS/6/RCV_OTHER_PURGED_LSP
Message
ISIS/6/RCV_OTHER_PURGED_LSP:ISIS [USHORT] received a purged LSP. (Level=[USHORT], PduLspId=[STRING], Interface=[STRING], NbrSystem=[STRING], SrcSystem=[STRING], SrcDynName=[STRING], SrcNbrSystem=[STRING])
Description
The IS-IS system received an LSP with Remaining Time 0 (purged LSP) from another system.
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
[process-id] |
Indicates the IS-IS process ID. |
Level |
Indicates the IS-IS level. |
PduLspId |
Indicates the ID of the purged LSP. |
Interface |
Indicates the interface that receives the purged LSP. |
NbrSystem |
Indicates the system ID of a neighbor. |
SrcSystem |
Indicates the system ID of the device that sends the purged LSP. |
SrcDynName |
Indicates the dynamic hostname of the device that sends the purged LSP. |
SrcNbrSystem |
Indicates the neighbor System ID of the device that sends the purged LSP. |
Procedure
- Check whether SrcSystem is available in the log.
- If SrcSystem is available, check the system ID of the device that sends the purged LSP and go to Step 3.
- If SrcSystem is unavailable, go to Step 2.
- Check NbrSystem in the log, download the log from
the neighbor, and check whether the purged LSP was sent by the neighbor.
- If the purged LPS was sent by the neighbor, go to Step 3.
- If the purged LPS was not sent by the neighbor, go to Step 4.
- Check whether the purged LSP has been deleted from the
device that sent it.
- If the purged LSP has been deleted from the device that sent it, this log message is informational only and no action is required.
- If the purged LSP has not been deleted from the device that sent it, go to Step 4.
- Locate the device that sends the purged LSP and go to Step 3.
- Collect log information and configuration information, and then contact technical support personnel.
- End.