Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACL6/3/PKTFLT_BUDRUN_FAIL
Procedure
- Run the display memory-usage command to check whether the memory usage of the active MPU exceeds 85%.
- If so, go to step 2.
- If not, go to step 4.
- Run the display acl all command to view configurations of all ACLs. Check whether redundant ACLs are configured.
- If so, run the undo acl ipv6 command in the system view to delete the redundant configurations, and go to step 3.
- If not, go to step 4.
- Check whether configuration information can be generated.
- If so, no further action is required.
- If not, go to step 4.
- Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.