Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
MCAST/3/VLAN
Message
MCAST/3/VLAN:Failed to set Vlan (VLANID=[ULONG])Attribute to (Attr=[ULONG], Result=[ULONG]).
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| VLANID | VLAN ID |
| Attr | attribute to be set
|
| Result | Indicates the error code of the failure to deliver the VLAN attribute to an interface. The error code 0 means that the VLAN attribute has been successfully delivered to the interface. |
Procedure
- Run the display vlan command to check whether the VLAN where an error occurs exist. If not, view the operation log and check whether the log is generated because the VLAN is deleted.
- If the log is generated because the undo vlan command is run, this log is normal information caused by the time sequence when the system processes the memory and does not need to be processed.
- For other cases, collect log information and configuration information, and then contact technical support personnel. For details, see Troubleshooting-Information Collection-Collecting Diagnostic Information.
