Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DOT1X/4/COMMAND_EXECUTE_FAILED
Possible Causes
- The command failed to be delivered because it conflicted with another command configured on the interface.
- The command failed to be delivered due to resource restrictions.
- The command failed to be delivered because the interface was added to an Eth-Trunk.
Procedure
- Check whether the interface configuration is correct based on logs.
- If so, go to step 2.
- If not, correct the configuration.
- Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
