Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM/4/PIMPKT_CHKSUM_ERR
Message
PIM/4/PIMPKT_CHKSUM_ERR:In VPN instance [vpn-instance-name], the PIM packet received from [source-address] was discarded because the checksum of this packet was incorrect, the message type was [message-type] received from the interface [interface] .(FlCode=[STRING][ULONG])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| [vpn-instance-name] | Indicates the name of a VPN instance. |
| [source-address] | Indicates a source address. |
| [message-type] | Indicates a message type. |
| [interface] | Indicates an inbound interface. |
| FlCode | Indicates the name of the source code file and the line number of this log message. |
Possible Causes
1. Bad conditions of the link lead to the transmission error.
2. The received packet is an attack PIM packet.
Procedure
- If the fault occurs occasionally, the fault may be caused by link transmission, and this log message can be ignored.
- If the fault occurs frequently, check the link conditions and use the packet header obtaining tool to obtain PIM packets. Obtain information about manufacturers and versions of other devices in the shared network and network topology, and then contact technical support personnel.