Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACL6/4/RPC_FAILED
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| ErrorCode | Indicates the error codes, including the following: 2: indicates that memory allocation for sending messages failed. 3: indicates that synchronizing IPC timed out. 4: indicates that message waiting queue overflowed. |
Possible Causes
When the ACL6 module sends information to the LPU, the RPC failed to call functions.
Procedure
- Run the display device command to check
whether the LPU has registered.
- If so, go to step 3.
- If not, go to step 2.
- If the LPU has not registered, RPC communication fails, which is normal. This log is informational only, and no action is required.
- Collect log information about RPC message sending failures of the LPU, and contact technical support personnel. For details, see Troubleshooting-Information Collection-Collecting Diagnostic Information.