Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DEFD/4/CPCAR_DROP_SLAVE
Message
DEFD/6/CPCAR_DROP_SLAVE:Rate of packets to cpu exceeded the CPCAR limit on the slaveboard. (Protocol=[STRING], CIR/CBS=[ULONG]/[ULONG], ExceededPacketCount=[STRING])
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| Protocol | Indicates the protocol type. |
| CIR/CBS | Indicates the committed information rate and committed burst size. |
| ExceededPacketCount | Indicates the number of packets whose rate exceeds the CPCAR. |
Possible Causes
The rate of packets delivered to the CPU exceeded the CPCAR limit on the standby card. As a result, the standby card discarded some packets.
Procedure
- Control the rate of packets delivered to the CPU within
the CPCAR limit, or run the car packet-type packet-type cir cir-value [ cbs cbs-value ] command to configure
a proper CPCAR limit.
Improper CPCAR settings will affect services on your network. If you need to adjust CPCAR settings, you are advised to contact technical support personnel for help.
