Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFPDT/4/PKT_INDISCARD_ABNL
Message
IFPDT/4/PKT_INDISCARD_ABNL:Interface input discard exceed the log threshold. (Interface=[STRING], Statistics=[STRING], LogThreshold=[ULONG], LogInterval=[ULONG](s))
Parameters
| Parameter Name | Parameter Meaning |
|---|---|
| Interface | Interface name. |
| Statistics | Statistics on discarded packets. |
| LogThreshold | Threshold for discarded packets. |
| LogInterval | Interval for collecting statistics on discarded packets. |
Procedure
- Run the display this command in the
interface view, and check whether inbound rate limiting is configured.
- If so, go to step 2.
- If not, go to step 3.
- Run the qos Ir inbound cir cir-value [ cbs cbs-value ] command to modify the rate or run
the undo qos lr inbound command to delete the rate
limiting configuration,then check whether the fault persists.
- If so, go to step 3.
- If not, go to step 4.
- Obtain the log file and configuration file, and contact technical support personnel.
- End.