No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Interface Management

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the principles and configurations of interfaces and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
How Do I Check Member Interfaces in a Port Group?

How Do I Check Member Interfaces in a Port Group?

You can run the display port-group [ all | port-group-name ] command to check member interfaces in a permanent port group.

The port group function allows you to configure interfaces in a batch. However, the device does not support query or saving of the port group configuration. You can run the display this command in the interface view of a member interface to check the configuration that takes effect on the interface.

# Check member interfaces in all permanent port groups.

<HUAWEI> display port-group all
Portgroup: 1
Portgroup: 2
Updated: 2019-12-28

Document ID: EDOC1000141936

Views: 50007

Downloads: 783

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next