No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Interface Management

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the principles and configurations of interfaces and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing Interface Traffic Statistics

Clearing Interface Traffic Statistics


To monitor the status of an interface or locate faults on the interface, collect traffic statistics on the interface. Before collecting traffic statistics on an interface within a period, clear the existing traffic statistics on this interface.

Interface statistics cannot be restored after they are cleared. Confirm your action before performing an operation.


  • Run the reset counters interface [ interface-type [ interface-number [.subinterface-number ] ] ] command to clear the interface statistics.
  • Run the reset counters if-mib interface [ interface-type [ interface-number [.subinterface-number ] ] ] command to clear traffic statistics on an interface in the network management system.
Updated: 2019-12-28

Document ID: EDOC1000141936

Views: 50289

Downloads: 783

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next