No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Priority of 802.1ag Packets in an MA

(Optional) Setting the Priority of 802.1ag Packets in an MA

Context

The 802.1ag packets with different 802.1p priorities are processed differently on the network. You can perform the following operations to change the priority of 802.1ag packets.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    cfm md md-name

    The MD view is displayed.

  3. Run:

    ma ma-name

    The MA view is displayed.

  4. Run:

    packet-priority priority

    The priority of 802.1ag packets in the MA is set.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000141941

Views: 90832

Downloads: 512

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next