No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Task Summary

Configuration Task Summary

DLDP can detect unidirectional links of optical fibers or copper twisted pairs.

Table 5-4 describes the DLDP configuration tasks.

Table 5-4  DLDP configuration task summary




Configure DLDP functions

DLDP detects unidirectional links.

Configure DLDP Functions

Reset the DLDP status

After the DLDP status of a disabled interface is reset, the interface re-detects unidirectional links.

Resetting the DLDP Status

Updated: 2019-08-21

Document ID: EDOC1000141941

Views: 91528

Downloads: 512

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next