No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an mVRRP6 Group

Configuring an mVRRP6 Group

Pre-configuration Tasks

An mVRRP6 group can be bound to VRRP6 groups and determine the status of its bound VRRP6 groups. mVRRP6 is used when multiple VRRP6 groups coexist. mVRRP6 helps decrease the number of VRRP6 Advertisement packets to be sent and minimize network bandwidth and system resource consumption.

Before configuring basic functions of an mVRRP6 group, configure network layer attributes of interfaces to ensure network connectivity.

Updated: 2019-08-21

Document ID: EDOC1000141941

Views: 91857

Downloads: 513

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next