No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - Reliability

S1720, S2700, S5700, and S6720 V200R010C00

This document describes the configuration of BFD, DLDP, VRRP, SmartLink, CFM, EFM, Y.1731 and MAC swap loopback to ensure reliability on the device.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
A Downstream Device Cannot Ping the Virtual IP Address of a VRRP Group

A Downstream Device Cannot Ping the Virtual IP Address of a VRRP Group

Fault Symptom

A downstream device cannot ping the virtual IP address of a VRRP group.

Procedure

  1. Check whether ping to the virtual IP address of the VRRP group is enabled.

    By default, the master is enabled to respond to ping packets. If this function is disabled, a downstream device cannot ping the virtual IP address of a VRRP group.

    Run the display current-configuration command in any view of the master to check whether the undo vrrp virtual-ip ping enable command is used. If the undo vrrp virtual-ip ping enable command is used, run the vrrp virtual-ip ping enable command in the system view to enable ping to the virtual IP address of a VRRP group.

Translation
Download
Updated: 2019-04-18

Document ID: EDOC1000141941

Views: 69358

Downloads: 481

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next